커뮤니티
수식확인
2023-05-28 11:40:03
780
글번호 169354
첨부 이미지
그림1
Inputs : Period(20), Sence(1.5), CC_DN(Yellow);
input : 기준가(12345);
Vars:
VLineUp(0),
VLineDn(0),
HHighest(0),
LLowest(0),
JustChanged(FALSE),
VLine(0), DBN(0),T(0);
Array:
Highs[35](0),
Lows[35](0),
RRange[35](0),
UpWave[1](FALSE),
DnWave[1](FALSE);
If STime == 180000 Then
DBN = 0;
DBN = DBN + 1;
Var1 = Period;
Var2 = Var1 - 1;
Var3 = Var1 - 2;
Var5 = Sence;
Var6 = H-L;
JustChanged = FALSE;
if CurrentBar <= Var2 then begin
Highs[CurrentBar] = Close;
Lows[CurrentBar] = Close;
RRange[CurrentBar] = (H-L) /2;
end;
if CurrentBar == Var1 then begin
if Highs[Var2] >= Highs[Var3] then begin
UpWave[1] = TRUE;
HHighest = Highs[Var2];
VLineUp = HHighest - (Var5 * MA(Var6,Var2));
#Plot1(VLineUp,"VLineUp");
end;
if Highs[Var2] < Highs[Var3] then begin
DnWave[1] = TRUE;
LLowest = Lows[Var2];
VLineDn = LLowest + (Var5 * MA(Var6,Var2));
#Plot2(VLineDn,"VLineDn");
end;
end;
if CurrentBar > Var1 then begin
if DnWave[1] and Close > VLineDn then begin
DnWave[1] = FALSE;
UpWave[1] = TRUE;
JustChanged = TRUE;
HHighest = Close;
LLowest = 0;
end;
if UpWave[1] and Close < VLineUp and JustChanged == FALSE then begin
UpWave[1] = FALSE;
DnWave[1] = TRUE;
JustChanged = TRUE;
LLowest = Close;
HHighest = 0;
end;
if JustChanged == FALSE then begin
if Close > HHighest then
HHighest = Close;
else if Close < LLowest then
LLowest = Close;
end;
VLineUp = HHighest - (Var5 * MA(Var6,Var2));
VLineDn = LLowest + (Var5 * MA(Var6,Var2));
if UpWave[1] then T = 1;
else if DnWave[1] then T = -1;
end;
if T == 1 and CrossUp(C,기준가) Then
Buy();
if T == -1 and CrossDown(C,기준가) Then
Sell();
안녕하세요
위식을 적용시 신호가 마지막 매도후 매수로 전환이 되야 하는데 않되고 있습니다
확인 부탁드려요
- 1. 170145_sw2.yin (0.00 MB)
- 2. 캡__처_.jpg (0.22 MB)
답변 1
예스스탁 예스스탁 답변
2023-05-30 13:55:51
안녕하세요
예스스탁입니다.
돌파시점 이후에 추세가 1로 변경이 되었습니다.
해당식 기준가를 돌파/이탈하는 시점에서
추세방향(T)이 1 아니면 -1이어야 합니다.
돌파이후에 1이나 -1로 변경되변 진입이 발생하지 않습니다.
돌파/이탈이후에 T값이 변경이 되도 진입하게 하기 위해서는
수식을 아래와 같이 변경하셔야 합니다.
Inputs : Period(20), Sence(1.5), CC_DN(Yellow);
input : 기준가(12345);
Vars:
VLineUp(0),
VLineDn(0),
HHighest(0),
LLowest(0),
JustChanged(FALSE),
VLine(0), DBN(0),T(0);
Array:
Highs[35](0),
Lows[35](0),
RRange[35](0),
UpWave[1](FALSE),
DnWave[1](FALSE);
If STime == 180000 Then
DBN = 0;
DBN = DBN + 1;
Var1 = Period;
Var2 = Var1 - 1;
Var3 = Var1 - 2;
Var5 = Sence;
Var6 = H-L;
JustChanged = FALSE;
if CurrentBar <= Var2 then begin
Highs[CurrentBar] = Close;
Lows[CurrentBar] = Close;
RRange[CurrentBar] = (H-L) /2;
end;
if CurrentBar == Var1 then begin
if Highs[Var2] >= Highs[Var3] then begin
UpWave[1] = TRUE;
HHighest = Highs[Var2];
VLineUp = HHighest - (Var5 * MA(Var6,Var2));
#Plot1(VLineUp,"VLineUp");
end;
if Highs[Var2] < Highs[Var3] then begin
DnWave[1] = TRUE;
LLowest = Lows[Var2];
VLineDn = LLowest + (Var5 * MA(Var6,Var2));
#Plot2(VLineDn,"VLineDn");
end;
end;
if CurrentBar > Var1 then begin
if DnWave[1] and Close > VLineDn then begin
DnWave[1] = FALSE;
UpWave[1] = TRUE;
JustChanged = TRUE;
HHighest = Close;
LLowest = 0;
end;
if UpWave[1] and Close < VLineUp and JustChanged == FALSE then begin
UpWave[1] = FALSE;
DnWave[1] = TRUE;
JustChanged = TRUE;
LLowest = Close;
HHighest = 0;
end;
if JustChanged == FALSE then begin
if Close > HHighest then
HHighest = Close;
else if Close < LLowest then
LLowest = Close;
end;
VLineUp = HHighest - (Var5 * MA(Var6,Var2));
VLineDn = LLowest + (Var5 * MA(Var6,Var2));
if UpWave[1] then T = 1;
else if DnWave[1] then T = -1;
end;
Condition1 = T == 1 and C > 기준가;
Condition2 = T == -1 and C < 기준가;
if Condition1 == true and Condition1[1] == False Then
Buy();
if Condition2 == true and Condition2[1] == False Then
Sell();
즐거운 하루되세요
> 아트정 님이 쓴 글입니다.
> 제목 : 수식확인
>
Inputs : Period(20), Sence(1.5), CC_DN(Yellow);
input : 기준가(12345);
Vars:
VLineUp(0),
VLineDn(0),
HHighest(0),
LLowest(0),
JustChanged(FALSE),
VLine(0), DBN(0),T(0);
Array:
Highs[35](0),
Lows[35](0),
RRange[35](0),
UpWave[1](FALSE),
DnWave[1](FALSE);
If STime == 180000 Then
DBN = 0;
DBN = DBN + 1;
Var1 = Period;
Var2 = Var1 - 1;
Var3 = Var1 - 2;
Var5 = Sence;
Var6 = H-L;
JustChanged = FALSE;
if CurrentBar <= Var2 then begin
Highs[CurrentBar] = Close;
Lows[CurrentBar] = Close;
RRange[CurrentBar] = (H-L) /2;
end;
if CurrentBar == Var1 then begin
if Highs[Var2] >= Highs[Var3] then begin
UpWave[1] = TRUE;
HHighest = Highs[Var2];
VLineUp = HHighest - (Var5 * MA(Var6,Var2));
#Plot1(VLineUp,"VLineUp");
end;
if Highs[Var2] < Highs[Var3] then begin
DnWave[1] = TRUE;
LLowest = Lows[Var2];
VLineDn = LLowest + (Var5 * MA(Var6,Var2));
#Plot2(VLineDn,"VLineDn");
end;
end;
if CurrentBar > Var1 then begin
if DnWave[1] and Close > VLineDn then begin
DnWave[1] = FALSE;
UpWave[1] = TRUE;
JustChanged = TRUE;
HHighest = Close;
LLowest = 0;
end;
if UpWave[1] and Close < VLineUp and JustChanged == FALSE then begin
UpWave[1] = FALSE;
DnWave[1] = TRUE;
JustChanged = TRUE;
LLowest = Close;
HHighest = 0;
end;
if JustChanged == FALSE then begin
if Close > HHighest then
HHighest = Close;
else if Close < LLowest then
LLowest = Close;
end;
VLineUp = HHighest - (Var5 * MA(Var6,Var2));
VLineDn = LLowest + (Var5 * MA(Var6,Var2));
if UpWave[1] then T = 1;
else if DnWave[1] then T = -1;
end;
if T == 1 and CrossUp(C,기준가) Then
Buy();
if T == -1 and CrossDown(C,기준가) Then
Sell();
안녕하세요
위식을 적용시 신호가 마지막 매도후 매수로 전환이 되야 하는데 않되고 있습니다
확인 부탁드려요