커뮤니티
타주기 RCI 지표
2011-07-21 01:10:55
843
글번호 41146
5분봉에서 30분봉의 RCI지표를 구현하고 싶습니다.
5분봉 차트에서 --- 타종목 선택 ----- 30분봉을 깐다음
타주기 지표 RCI지표를 깔았는데 어디가 틀렸는지 되지를 않네요.
부탁드립니다.
----------------------------------------------------------------------------
input : P1(9),P2(13),P3(18),P4(26);
Var : cnt(0),Nth(0),tempmax(0), tempindex(0), X1(0),RCI1(0),X2(0),RCI2(0),X3(0),RCI3(0),X4(0),RCI4(0);
Array : VALUE1[50](0),VALUE2[50](0),VALUE3[50](0),VALUE4[50](0),NTHVALUE[50](0);
for cnt = 0 to 49{
VALUE1[cnt] = C[cnt];
VALUE2[cnt] = C[cnt];
VALUE3[cnt] = C[cnt];
VALUE4[cnt] = C[cnt];
}
###############################################
For Nth = 0 to P1-1 {
tempmax = -99999999;
For cnt = 0 to P1-1{
if VALUE1[cnt] > tempmax then{
tempmax = VALUE1[cnt];
tempIndex = cnt;
NTHVALUE[cnt] = Nth+1;
}
}
VALUE1[tempIndex] = -99999999;
}
X1 = 0;
for cnt = 0 to P1-1{
X1 = X1+ABS((cnt+1)-NTHVALUE[cnt])^2;
}
RCI1 = (1-(6*X1)/(P1*(P1^2-1)))*100;
###############################################
For Nth = 0 to P2-1 {
tempmax = -99999999;
For cnt = 0 to P2-1{
if value2[cnt] > tempmax then{
tempmax = value2[cnt];
tempIndex = cnt;
NTHVALUE[cnt] = Nth+1;
}
}
VALUE2[tempIndex] = -99999999;
}
X2 = 0;
for cnt = 0 to P2-1{
X2 = X2+ABS((cnt+1)-NTHVALUE[cnt])^2;
}
RCI2 = (1-(6*X2)/(P2*(P2^2-1)))*100;
###############################################
For Nth = 0 to P3-1 {
tempmax = -99999999;
For cnt = 0 to P3-1{
if value3[cnt] > tempmax then{
tempmax = value3[cnt];
tempIndex = cnt;
NTHVALUE[cnt] = Nth+1;
}
}
VALUE3[tempIndex] = -99999999;
}
X3 = 0;
for cnt = 0 to P3-1{
X3 = X3+ABS((cnt+1)-NTHVALUE[cnt])^2;
}
RCI3 = (1-(6*X3)/(P3*(P3^2-1)))*100;
###############################################
For Nth = 0 to P4-1 {
tempmax = -99999999;
For cnt = 0 to P4-1{
if value4[cnt] > tempmax then{
tempmax = value4[cnt];
tempIndex = cnt;
NTHVALUE[cnt] = Nth+1;
}
}
VALUE4[tempIndex] = -99999999;
}
X4 = 0;
for cnt = 0 to P4-1{
X4 = X4+ABS((cnt+1)-NTHVALUE[cnt])^2;
}
RCI4 = (1-(6*X4)/(P4*(P4^2-1)))*100;
plot1(data2(RCI1));
plot2(data2(RCI2));
plot3(data2(RCI3));
plot4(data2(RCI4));
답변 1
예스스탁 예스스탁 답변
2011-07-21 10:14:28
안녕하세요
예스스탁입니다
수식에서 계산되는 데이터를 data2로 지정하셔야 합니다.
수정한 식입니다.
input : P1(9),P2(13),P3(18),P4(26);
Var : CC(0,data2),cnt(0),Nth(0),tempmax(0), tempindex(0), X1(0),RCI1(0),X2(0),RCI2(0),X3(0),RCI3(0),X4(0),RCI4(0);
Array : Val1[50](0),Val2[50](0),Val3[50](0),Val4[50](0),NTHVALUE[50](0);
CC = Data2(C);
for cnt = 0 to 49{
Val1[cnt] = CC[cnt];
Val2[cnt] = CC[cnt];
Val3[cnt] = CC[cnt];
Val4[cnt] = CC[cnt];
}
###############################################
For Nth = 0 to P1-1 {
tempmax = -99999999;
For cnt = 0 to P1-1{
if Val1[cnt] > tempmax then{
tempmax = Val1[cnt];
tempIndex = cnt;
NTHVALUE[cnt] = Nth+1;
}
}
Val1[tempIndex] = -99999999;
}
X1 = 0;
for cnt = 0 to P1-1{
X1 = X1+ABS((cnt+1)-NTHVALUE[cnt])^2;
}
RCI1 = (1-(6*X1)/(P1*(P1^2-1)))*100;
###############################################
For Nth = 0 to P2-1 {
tempmax = -99999999;
For cnt = 0 to P2-1{
if Val2[cnt] > tempmax then{
tempmax = Val2[cnt];
tempIndex = cnt;
NTHVALUE[cnt] = Nth+1;
}
}
Val2[tempIndex] = -99999999;
}
X2 = 0;
for cnt = 0 to P2-1{
X2 = X2+ABS((cnt+1)-NTHVALUE[cnt])^2;
}
RCI2 = (1-(6*X2)/(P2*(P2^2-1)))*100;
###############################################
For Nth = 0 to P3-1 {
tempmax = -99999999;
For cnt = 0 to P3-1{
if Val3[cnt] > tempmax then{
tempmax = Val3[cnt];
tempIndex = cnt;
NTHVALUE[cnt] = Nth+1;
}
}
Val3[tempIndex] = -99999999;
}
X3 = 0;
for cnt = 0 to P3-1{
X3 = X3+ABS((cnt+1)-NTHVALUE[cnt])^2;
}
RCI3 = (1-(6*X3)/(P3*(P3^2-1)))*100;
###############################################
For Nth = 0 to P4-1 {
tempmax = -99999999;
For cnt = 0 to P4-1{
if Val4[cnt] > tempmax then{
tempmax = Val4[cnt];
tempIndex = cnt;
NTHVALUE[cnt] = Nth+1;
}
}
Val4[tempIndex] = -99999999;
}
X4 = 0;
for cnt = 0 to P4-1{
X4 = X4+ABS((cnt+1)-NTHVALUE[cnt])^2;
}
RCI4 = (1-(6*X4)/(P4*(P4^2-1)))*100;
plot1(RCI1);
plot2(RCI2);
plot3(RCI3);
plot4(RCI4);
즐거운 하루되세요
> 까냐스키 님이 쓴 글입니다.
> 제목 : 타주기 RCI 지표
>
5분봉에서 30분봉의 RCI지표를 구현하고 싶습니다.
5분봉 차트에서 --- 타종목 선택 ----- 30분봉을 깐다음
타주기 지표 RCI지표를 깔았는데 어디가 틀렸는지 되지를 않네요.
부탁드립니다.
----------------------------------------------------------------------------
input : P1(9),P2(13),P3(18),P4(26);
Var : cnt(0),Nth(0),tempmax(0), tempindex(0), X1(0),RCI1(0),X2(0),RCI2(0),X3(0),RCI3(0),X4(0),RCI4(0);
Array : VALUE1[50](0),VALUE2[50](0),VALUE3[50](0),VALUE4[50](0),NTHVALUE[50](0);
for cnt = 0 to 49{
VALUE1[cnt] = C[cnt];
VALUE2[cnt] = C[cnt];
VALUE3[cnt] = C[cnt];
VALUE4[cnt] = C[cnt];
}
###############################################
For Nth = 0 to P1-1 {
tempmax = -99999999;
For cnt = 0 to P1-1{
if VALUE1[cnt] > tempmax then{
tempmax = VALUE1[cnt];
tempIndex = cnt;
NTHVALUE[cnt] = Nth+1;
}
}
VALUE1[tempIndex] = -99999999;
}
X1 = 0;
for cnt = 0 to P1-1{
X1 = X1+ABS((cnt+1)-NTHVALUE[cnt])^2;
}
RCI1 = (1-(6*X1)/(P1*(P1^2-1)))*100;
###############################################
For Nth = 0 to P2-1 {
tempmax = -99999999;
For cnt = 0 to P2-1{
if value2[cnt] > tempmax then{
tempmax = value2[cnt];
tempIndex = cnt;
NTHVALUE[cnt] = Nth+1;
}
}
VALUE2[tempIndex] = -99999999;
}
X2 = 0;
for cnt = 0 to P2-1{
X2 = X2+ABS((cnt+1)-NTHVALUE[cnt])^2;
}
RCI2 = (1-(6*X2)/(P2*(P2^2-1)))*100;
###############################################
For Nth = 0 to P3-1 {
tempmax = -99999999;
For cnt = 0 to P3-1{
if value3[cnt] > tempmax then{
tempmax = value3[cnt];
tempIndex = cnt;
NTHVALUE[cnt] = Nth+1;
}
}
VALUE3[tempIndex] = -99999999;
}
X3 = 0;
for cnt = 0 to P3-1{
X3 = X3+ABS((cnt+1)-NTHVALUE[cnt])^2;
}
RCI3 = (1-(6*X3)/(P3*(P3^2-1)))*100;
###############################################
For Nth = 0 to P4-1 {
tempmax = -99999999;
For cnt = 0 to P4-1{
if value4[cnt] > tempmax then{
tempmax = value4[cnt];
tempIndex = cnt;
NTHVALUE[cnt] = Nth+1;
}
}
VALUE4[tempIndex] = -99999999;
}
X4 = 0;
for cnt = 0 to P4-1{
X4 = X4+ABS((cnt+1)-NTHVALUE[cnt])^2;
}
RCI4 = (1-(6*X4)/(P4*(P4^2-1)))*100;
plot1(data2(RCI1));
plot2(data2(RCI2));
plot3(data2(RCI3));
plot4(data2(RCI4));
다음글
이전글